regarding at-command & vb6

[fren]

hey, does anyone know how to categorize the numbers together under the same
name in phone memory?

eg: Lulu has 2 numbers---> 6123456 that is "/H"

----> 9123456 that is "/M"


then we need to make sure that it will display the numbers under the same
name. because on SIM card we can display the numbers under the same name but
in Phone contacts we are unable to do it.


in SIM contacts it hhas the arrow key to select if u want to choose either
home number or mobile number.


in Phone contacts. it is display as different slots. it dosn't have the
arrow key for us to select the numbers.


We are using AT commands to write back the contacts into the phone memory
and we are using the Visual Basic 6 to categorized the numbers into "/H" and
"/M".

[Dean Earley]

Post by fren
hey, does anyone know how to categorize the numbers together under the same
name in phone memory?
eg: Lulu has 2 numbers---> 6123456 that is "/H"
----> 9123456 that is "/M"
then we need to make sure that it will display the numbers under the same
name. because on SIM card we can display the numbers under the same name but
in Phone contacts we are unable to do it.
in SIM contacts it hhas the arrow key to select if u want to choose either
home number or mobile number.
in Phone contacts. it is display as different slots. it dosn't have the
arrow key for us to select the numbers.
We are using AT commands to write back the contacts into the phone memory
and we are using the Visual Basic 6 to categorized the numbers into "/H" and
"/M".

I doubt you can do it in a standard AT way as the SIMs don't have
multiple numbers per name.
You will probably have more luck using a phone specific API from the
manufacturer so you can interface with it properly.